menu
| Flywheel Diameter | 10.994 |
| Flywheel Cup Depth/Step Height | -0.059 |
| Flywheel Inner Diameter | 6.781 |
| Number Of Mounting Bores | 24 |
| Number of Teeth | 129 |
| Dowel Hole Pattern | 5 |
| Bolt Hole Pattern | 2 |
| Has Dowel Pins | with Dowel Pins |
| Ring Gear Chamfer Position @ 6:00 O´clock | Left |
| Ring Gear Chamfer matches OE | Ring Gear Chamfer matches OE |
| Ring Gear Chamfer Side | Engine |
| Flywheel matches Clutch | Flywheel matches Clutch |
| Number of teeth, starter ring gear | 129 |
| Flange Thickness | 10.97 |
| I.D. for Pilot | 31.88 |
| Bolt hole PCD crankshaft | 85.03 |
| Ring Gear Mounting O.D. | 291.07 |
| Ring Gear Thickness | 11.16 |
| Bolt hole PCD clutch pres.plte | 311 |
| Flywheel Thickness [mm] | 48.85 |
| Centering diameter / dowel hole | 12.2441 |
| Flywheel Cup Depth or Step Height | -0.0591 |
| Ring Gear Major Dia. | 12.9878 |
| Crank To Friction Surface | 1.9937 |
| Overall Casting O.D. | 12.9496 |
| Flywheel friction surface outer diameter | 10.9941 |
| Crank Hole Dia. | 0.4106 |
| Flywheel Friction Surface Inner diameter | 6.7815 |
| Dowel hole diameter | 0.3957 |
| Part Terminology | Clutch Flywheel |
