Flywheel Diameter | 8.484 |
Flywheel Cup Depth/Step Height | 0.02 |
Flywheel Inner Diameter | 5.394 |
Number Of Mounting Bores | 24 |
Number of Teeth | 106 |
Dowel Hole Pattern | 5 |
Bolt Hole Pattern | 2 |
Has Dowel Pins | with Dowel Pins |
Ring Gear Chamfer Position @ 6:00 O´clock | Left |
Ring Gear Chamfer Side | Engine |
Number of teeth, starter ring gear | 106 |
Flywheel Cup Depth or Step Height | 0.5 |
Flange Thickness | 11.58 |
Bolt hole PCD clutch pres.plte | 250 |
Crank To Friction Surface | 1.048 |
Overall Casting O.D. | 271.55 |
Ring Gear Thickness | 8.95 |
Flywheel Thickness [mm] | 31.69 |
Crank Hole Dia. | 10.54 |
Centering diameter / dowel hole | 9.8425 |
Flywheel Friction Surface Inner diameter | 5.3937 |
Ring Gear Major Dia. | 10.6835 |
I.D. for Pilot | 1.4083 |
Bolt hole PCD crankshaft | 2.3543 |
Ring Gear Mounting O.D. | 9.3264 |
Flywheel friction surface outer diameter | 8.4843 |
Dowel hole diameter | 0.3142 |
Part Terminology | Clutch Flywheel |