menu
| Flywheel Diameter | 13.031 |
| Flywheel Inner Diameter | 7.795 |
| Number Of Mounting Bores | 24 |
| Flywheel Cup Depth/Step Height | 0 |
| Number of Teeth | 152 |
| Has Dowel Pins | without Dowel Pins |
| Bolt Hole Pattern | 3 |
| Ring Gear Chamfer Position @ 6:00 O´clock | Left |
| Ring Gear Chamfer Side | Engine |
| Number of teeth, starter ring gear | 152 |
| Flange Thickness | 16.53 |
| I.D. for Pilot | 25.29 |
| Ring Gear Mounting O.D. | 366 |
| Crank To Friction Surface | 1.513 |
| Overall Casting O.D. | 378.65 |
| Bolt hole PCD clutch pres.plte | 358.7 |
| Flywheel Thickness [mm] | 42 |
| Crank Hole Dia. | 12.66 |
| Ring Gear Major Dia. | 15.3543 |
| Bolt hole PCD crankshaft | 4.3307 |
| Ring Gear Thickness | 0.6039 |
| Flywheel friction surface outer diameter | 13.0315 |
| Flywheel Friction Surface Inner diameter | 7.7953 |
| Part Terminology | Clutch Flywheel |
