menu
| Flywheel Diameter | 8.583 |
| Flywheel Inner Diameter | 5.827 |
| Flywheel Cup Depth/Step Height | 0.033 |
| Number Of Mounting Bores | 24 |
| Number of Teeth | 113 |
| Number of teeth, starter ring gear | 113 |
| Dowel Hole Pattern | 5 |
| Bolt Hole Pattern | 2 |
| Has Dowel Pins | with Dowel Pins |
| Flywheel Friction Surface Inner diameter | 148 |
| Ring Gear Chamfer Position @ 6:00 O´clock | Left |
| Ring Gear Chamfer matches OE | Ring Gear Chamfer matches OE |
| Ring Gear Chamfer Side | Engine |
| Flywheel matches Clutch | Flywheel matches Clutch |
| Flange Thickness | 8.6 |
| Bolt hole PCD clutch pres.plte | 247 |
| Centering diameter / dowel hole | 247 |
| Ring Gear Major Dia. | 292.17 |
| I.D. for Pilot | 36.93 |
| Crank To Friction Surface | 19.97 |
| Flywheel friction surface outer diameter | 8.5827 |
| Dowel hole diameter | 0.2362 |
| Ring Gear Thickness | 0.3622 |
| Bolt hole PCD crankshaft | 2.4803 |
| Flywheel Thickness [mm] | 1.0039 |
| Ring Gear Mounting O.D. | 10.4472 |
| Overall Casting O.D. | 10.7783 |
| Flywheel Cup Depth or Step Height | 0.0335 |
| Crank Hole Dia. | 0.4949 |
| Part Terminology | Clutch Flywheel |
