Buy Online - Pick Up In Store
Error Storing Vehicle
directions_car close
308 Results
Part # 81350
$520.50
Specialty Products
Alignment caster / camber control arm
Alignment caster / camber control arm
This set of adjustable upper control arms will allow ±1.5° camber and/or caster change on a wide range of Audi and VW models. These arms directly replace the factory fixed-length arms, allowing for easy adjustments after installation. Engineered for both street and track use, forged 6061-T6 aluminum ends with 18mm threaded adjuster links assure this is the stongest kit available. Maintenance free ball joints and bushings provide factory ride, handling, and NVH performance. The upper control arm ball joint pinch bolt is frequently corroded and must be cut out when removing or replacing these upper arms. This kit includes a 12.9 grade bolt & nut replacement kit with 720 hour saltspray coating to minimize future corrosion.
help
Not Fitted / Universal
Part # 67806
$226.07
Specialty Products
Alignment camber kit
Alignment camber kit
Many of the early Toyota RAV4 models no longer have rear toe adjustment due to a factory recall. This arm fits these early recalled models as well as the later models. This simple to replace lower control arm provides a full ±3.0° of toe adjustment to get tire wear and adjustability back to when the vehicle was new.
help
Not Fitted / Universal
Part # 00098
$54.42
Specialty Products
Brake lathe silencer
Brake lathe silencer
This adjustable silencer is made of latex tubing with lead weight implants. DIMENSIONS: 32" long
help
Not Fitted / Universal
Part # 00080
$67.05
Specialty Products
Brake lathe silencer
Brake lathe silencer
00080 drum silencer fits any passanger car drums. Made of natural rubber. It wraps around the drum and is secured with a buckle. DIMENSIONS: 1-3/4" wide, 72" long
help
Not Fitted / Universal
Part # 00095
$73.55
Specialty Products
Brake lathe silencer
Brake lathe silencer
Used on any brake lathe and with any ventilated rotor, they suppress vibration and noise. Segmented silencer is made of the finest latex rubber tubing with four (4) steel tubes to quiet chatter. Recommended for all disc resurfacing machines. DIMENSIONS:9" diameter
help
Not Fitted / Universal
Part # 25480
$1,108.51
Specialty Products
Alignment caster / camber control arm
Alignment caster / camber control arm
Improve droop travel, drivability and tire wear as well as adjusting tire position in your wheel well with SPC's adjustable front upper control arms on many Toyota trucks and SUVs. Featuring our long life maintainable ball joint and SpecRide bushings, this arm is designed to correct alignment angles while maintaining factory ride quality. SPC's integrated tubular and cast steel design provides the strength and durability needed for the most demanding environments. These remove and replace arms are available in pairs for lifted and off-road applications.

Get more drrop travel: SPC's arm has improved clearance to get around the spring bucket when the arm droops, eliminating arm to frame contact on lifted trucks. The maintainable ball joint has an oversized ball and allows for more than 80° of articulation to ensure it never binds. SpecRide bushings have free pivot to eliminate any chance of bushing failure seen on many high travel suspensions.

Get your drivability and tracking back: When you lift your truck you affect caster and camber. SPC's arms have +1° of caster built into them. Using its patented ball joint design the arm will get you 0° to +4° of caster and ±2° of camber.

Get your tire where you want it in the wheel well: Use adjustment in the control arm and on the OE lower cams to maximize alignment angles adn move oversized tires forward in the wheel well to minimize or avoid fender trimming.
help
Not Fitted / Universal
Part # 13410
$320.68
Specialty Products
Suspension control arm
Suspension control arm
These direct-fit front upper control arms add strength, on-car adjustability and articulation flexibility to your stock-height or 'lifted' suspension Wrangler. They feature SPC's xAxis sealed flex joints mounted in forged rings at the frame ends to provide bind-free 'twist' between the frame and axle during off-road articulation. The dual-threaded adjuster and jam nuts make caster/pinion angle adjustments quick and easy without the need to disconnect the arms or mess with cams and slotted hole knock-outs. Main tube is 3/16" wall DOM steel for 'overkill' strength to handle large tires, low gearing, and big horsepower.
help
Not Fitted / Universal
Part # 13415
$323.40
Specialty Products
Suspension control arm
Suspension control arm
These direct-fit, stock-length front lower control arms add strength, and articulation flexibility for your stock-height or 'lifted' suspension Wrangler. They feature SPC's xAxis sealed flex joints to provide bind-free 'twist' between the frame and axleduring off-road articulation. The main tube is 3/16" wall round DOM steel to provide strength and a knobby-tread-friendly shape to handle large tires, low gearing, and big horsepower.
help
Not Fitted / Universal
Part # 13420
$392.47
Specialty Products
Suspension control arm
Suspension control arm
These direct-fit rear upper control arms add strength, on-car adjustability and articulation flexibility ot your stock-height or 'lifted' suspension Wrangler. They feature SPC's xAxis sealed flex joints mounted in forged rings on the axle ends to provide bind-free 'twist' between the frame and axle during off-road articulation. The dual-threaded adjuster and jam nuts make rear pinion angle adjustments quick and easy without the need to disconnect the arms. Main tube is 3/16" wall DOM steel for 'overkill' strength to handle large tires, low gearing, and big horsepower.
help
Not Fitted / Universal
Part # 13425
$319.36
Specialty Products
Suspension control arm
Suspension control arm
These direct-fit, stock-legth rear lower control arms add strength and articulation flexibility to your stock-height or 'lifted' Wrangler. They feature SPC's xAxis sealed flex joints at one end to provide bind-free 'twist' between the frame and axle during off-road articulation. The main tube is 3/16" wall round DOM steel to provide strength to handle large tires, low gearing, and big horsepower.
help
Not Fitted / Universal
Part # 23960
$294.14
Specialty Products
Alignment camber ball joint
Alignment camber ball joint
These heavy duty offset ball joints have a built in 3 degree offset which can be clocked to affect camber, caster, or both. They are ideal for vehicles which cannot be aligned properly with the factory cam bolts due to installation of a lift or levelingkit. As an additional benefit, they also raise the outer end of the upper control arm, which increases clearance between the arm and the droop travel stops on the frame. This restores droop travel on trucks with leveling kits, and eliminates noise vibration harshness caused by arm to frame contact. Note: Due to strength limitations of the factory upper control arm, this ball joint should not be used on trucks with tires larger than 33" unless a "tall knuckle" lift kit is installed.
help
Not Fitted / Universal
Part # 23101
$34.31
Specialty Products
Alignment caster / camber bushing
Alignment caster / camber bushing
Change camber,caster, or both on twin traction beam Dana 44s with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve puller, remove the existing sleeve. Unstall zero degree sleeve 23109 to determine the change needed, then install the correct sleeve. To split camber and caster adjustment, rotate sleeve 45°.
help
Not Fitted / Universal
Parts Catalog
Shop All