LUBEGARD(R) SEAL FIXXTM is an industrial strength and cost-effective stop leak that works quickly. This unique formula will lubricate and revitalize worn or dried out seals safely without causing harm to internal components. SEAL FIXX is compatible with conventional and synthetic ATFs, motor oils, power steering fluids, and automotive & industrial hydraulic fluids. It works in diesel or gasoline engines, differentials, automatic & manual transmissions, and power steering systems. SEAL FIXX is perfect for industrial and farming applications that require hydraulic fluid such as jacks, tractors, plows, lifts, etc.

LUBEGARD(R) COMPLETETM Full Synthetic ATF is a world-class lubricant formulated for outstanding performance and efficiency in meeting or exceeding OEM requirement for reduced viscosity, so much so, that it is suitable for use in over 140 different ATF applications. Lubegard's unique, proprietary LXE(R) Technology provides superior wear protection with improved frictional and shear stability (high film strength for the life of the fluid). This unique technology prevents and eliminates torque converter shudder, improves shift quality and imparts excellent torque carrying capacity for long clutch and component life. LXE(R) Technology is seal and o-ring friendly, ideal for new, older, and higher-mileage vehicles. Lubegard(R) COMPLETETM Full Synthetic ATF is recommended for all automatic transmissions that require a fully formulated low viscosity ATF with exceptional performance and uncompromising protection. It is engineered to meet or exceed OEM requirements where lower viscosity is required.

COMPLETE TM POWER STEERING FLUID is a hydraulic fluid that is intermittently pressurized by a high shear, high friction pump and is used in a high shear turbine motor to aid in turning a car's steering wheel. Since the fluid is subjected to hard, long term use, without regular changing intervals, it is critically important to provide extra anti-wear, anti-friction, and anti-corrosion components, as well as oxidation stability and a high flash point for fire protection. Power steering fluid is not interchangeable with automatic transmission fluid (ATF) because ATF does not have the anti-wear protection or shear stability needed to protect the power steering pump. LUBEGARD(R) POWER STEERING FLUID is specifically formulated for power steering systems and is useful in hot and cold weather environments. Top quality base oils plus a full complement of performance additives provide excellent viscosity characteristics, shear stability, rust and corrosion protection, seal integrity, and detergency; while the patented LXE(R) (liquid wax ester) derivatives provide the extra friction and wear protection, oxidation stability, and heat rejection. The flash point of LUBEGARD(R) is equal to that of motor oils (above 475degF) and higher than that of ATF fluids.

This Flush and Protect pack will safely flush out unwanted heat causing contaminants and prevent overheating with the essential protectant product. For use with or without a flush machine.

LUBEGARD Kooler Kleen Transmission Cooler Line Flush with 2-in-1 Fitting now comes with an upgraded oil cooler fitting that combines our original 5/16-inch and a cone-style "universal" fitting into one. The cone-style version is easily unscrewed to access the 5/16-inch version underneath. LUBEGARD Kooler Kleen Transmission Cooler Line Flush uses a proprietary mix of detergents to safely clean transmission cooler and cooler lines in automatic, CVT, DCT and manual transmissions prior to installing new transmissions and converters. As recommended by OEMs, transmission fluid cooler lines MUST BE flushed prior to installing new units to prevent contaminants such as friction materials and metal debris from entering newly installed transmissions. Kooler Kleen safely removes these contaminants from the transmission cooler and lines without use of soapy water that could be detrimental to transmissions. It is compatible with all transmission fluids and coolers. It's ideal for shops that do not have hot flush machines to clean the transmission cooler lines.

LUBEGARD(R) Assemblee GooTM is formulated for use as an assembly aid and lubricant for virtually any assembly application (including engine). It facilitates the assembly process by holding components such as needle bearings and hydraulic seals in place, helping to achieve a faster, trouble-free rebuild. Assemblee GooTM also provides the initial lubrication for the moving parts on the first start-up after service, preventing wear and scoring. It will not melt at shop or workbench temperatures and provides either light or firm tack as your assembly requires. Yet, it dissolves and becomes soluble in transmission fluids at operating temperatures, without clogging filters or solenoid valves. LUBEGARD(R) Assemblee GooTM is dyed to eliminate misdiagnosing leaks.

KOOL-ITTM Coolant Treatment is chemically engineered to reduce the surface tension of coolant, penetrating metal surfaces at vital heat-transfer areas. This formula's thinner endogenous surface films magnify the rate of heat transfer in both cylinder heads and radiators. And, because of their extraordinary resiliency, they provide tougher, longer lasting protection of the complex alloys in contemporary radiators. Due to its unique chemical composition, Kool-ItTM is also very effective at preventing damage from electrolysis, corrosion, and pitting. It provides 100% cooling system corrosion protection even in straight water applications. The overwhelming majority of failures associated with aluminum radiators found in most newer vehicles are due to corrosion. The corrosion forms because of deficient chemical protection within the coolant. Kool-ItTM is the easiest and most cost-effective way to protect radiators and heater cores to prevent warranty claims. It is compatible with all types of antifreeze, providing total cooling system protection required for today's modern vehicles.

Use KOOL-IT(R) super foaming action to remove inanimate contaminates in air conditioning and heater systems of modern cars and trucks. KOOL-IT(R) is released into the HVAC system and its super foaming action flushes out and neutralize unwanted contaminants.

LUBEGARD(R) Instant Shudder FixxTM is a concentrated friction modifier formulated specifically for eliminating torque converter shudder problems in automatic transmissions. It is the #1 shudder fix used by professionals.

2 jobs ? 1 solution - Use as a Conversion Additive to enhance base ATFs into OEM ATF equivalents. Simply add to any base ATF (except Ford Type F and CVT) to create a premium OEM ATF equivalent. This one product eliminates ATF confusion, requires minimal shelf space, and costs significantly less than OEM ATFs. Or, you can supplement your current ATF with Platinum to extend the life of the ATF and the transmission. LUBEGARD(R) High-Performance Automatic Transmission Fluid Protectant is a concentrated additive package infused with superior seal conditioners and friction modifiers. This unique product restores additive content to used ATF and enhances new ATF resulting in improved performance and smoother, more consistent shifting. It can safely be added to any automatic transmission fluid (ATF) including full High-Performance, semi High-Performance, conventional, and low viscosity fluids except Ford Type F or CVT. LUBEGARD(R) High-Performance Automatic Transmission Fluid Protectant is engineered to raise the thermal and oxidative stability level of automatic transmission fluids, so when it operates at elevated temperatures, it does not thin out and pyrolize, burn, or react with oxygen and form deposits. It is formulated with proprietary Liquid Wax Esters (LXE(R)) that are unique because of their natural lubricity, high viscosity index, and high flash and fire points. They can withstand repeated heating to temperatures as high as 570degF. LXE(R) gives automatic transmission fluid the extra lubricity needed for transmission's unique frictional requirements. They improve heat conductivity, suppress foaming and, consequently, reduce transmission operating temperatures.