Buy Online - Pick Up In Store
Error Storing Vehicle
directions_car close
menu
keyboard_arrow_right
keyboard_arrow_right
Refine Results By

Filter

close
15757 Results
Part # 12270
Gates
$71.17
Molded heater hose
Molded heater hose

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit todays smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.

  • Has all the quality features of Gates molded coolant hose and similar to OEM specifications
  • Engineered to resist electrochemical degradation the leading cause of hose failure
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
  • Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)

NOTE: Gates recommends replacing hose clamps each time a new coolant hose is installed.

CAUTION: Do not use for fuel or oil transfer applications.

help
Not Fitted / Universal
Part # 12274
Gates
$55.73
Molded heater hose
Molded heater hose

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit todays smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.

  • Has all the quality features of Gates molded coolant hose and similar to OEM specifications
  • Engineered to resist electrochemical degradation the leading cause of hose failure
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
  • Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)

NOTE: Gates recommends replacing hose clamps each time a new coolant hose is installed.

CAUTION: Do not use for fuel or oil transfer applications.

help
Not Fitted / Universal
Part # 12271
Gates
$33.30
Molded heater hose
Molded heater hose

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit todays smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.

  • Has all the quality features of Gates molded coolant hose and similar to OEM specifications
  • Engineered to resist electrochemical degradation the leading cause of hose failure
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
  • Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)

NOTE: Gates recommends replacing hose clamps each time a new coolant hose is installed.

CAUTION: Do not use for fuel or oil transfer applications.

help
Not Fitted / Universal
Part # 12272
Gates
$39.67
Molded heater hose
Molded heater hose

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit todays smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.

  • Has all the quality features of Gates molded coolant hose and similar to OEM specifications
  • Engineered to resist electrochemical degradation the leading cause of hose failure
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
  • Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)

NOTE: Gates recommends replacing hose clamps each time a new coolant hose is installed.

CAUTION: Do not use for fuel or oil transfer applications.

help
Not Fitted / Universal
Part # 12275
Gates
$21.89
Molded heater hose
Molded heater hose

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit todays smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.

  • Has all the quality features of Gates molded coolant hose and similar to OEM specifications
  • Engineered to resist electrochemical degradation the leading cause of hose failure
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
  • Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)

NOTE: Gates recommends replacing hose clamps each time a new coolant hose is installed.

CAUTION: Do not use for fuel or oil transfer applications.

help
Not Fitted / Universal
Part # 12276
Gates
$11.74
Molded heater hose
Molded heater hose

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit todays smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.

  • Has all the quality features of Gates molded coolant hose and similar to OEM specifications
  • Engineered to resist electrochemical degradation the leading cause of hose failure
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
  • Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)

NOTE: Gates recommends replacing hose clamps each time a new coolant hose is installed.

CAUTION: Do not use for fuel or oil transfer applications.

help
Not Fitted / Universal
Part # 12292
Gates
$15.19
Molded heater hose
Molded heater hose

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit todays smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.

  • Has all the quality features of Gates molded coolant hose and similar to OEM specifications
  • Engineered to resist electrochemical degradation the leading cause of hose failure
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
  • Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)

NOTE: Gates recommends replacing hose clamps each time a new coolant hose is installed.

CAUTION: Do not use for fuel or oil transfer applications.

help
Not Fitted / Universal
Part # 12277
Gates
$35.79
Molded heater hose
Molded heater hose

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit todays smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.

  • Has all the quality features of Gates molded coolant hose and similar to OEM specifications
  • Engineered to resist electrochemical degradation the leading cause of hose failure
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
  • Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)

NOTE: Gates recommends replacing hose clamps each time a new coolant hose is installed.

CAUTION: Do not use for fuel or oil transfer applications.

help
Not Fitted / Universal
Part # 12283
Gates
$12.30
Molded heater hose
Molded heater hose

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit todays smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.

  • Has all the quality features of Gates molded coolant hose and similar to OEM specifications
  • Engineered to resist electrochemical degradation the leading cause of hose failure
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
  • Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)

NOTE: Gates recommends replacing hose clamps each time a new coolant hose is installed.

CAUTION: Do not use for fuel or oil transfer applications.

help
Not Fitted / Universal
Part # 12293
Gates
$9.32
Molded heater hose
Molded heater hose

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit todays smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.

  • Has all the quality features of Gates molded coolant hose and similar to OEM specifications
  • Engineered to resist electrochemical degradation the leading cause of hose failure
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
  • Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)

NOTE: Gates recommends replacing hose clamps each time a new coolant hose is installed.

CAUTION: Do not use for fuel or oil transfer applications.

help
Not Fitted / Universal
Part # 12298
Gates
$43.63
Molded heater hose
Molded heater hose

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit todays smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.

  • Has all the quality features of Gates molded coolant hose and similar to OEM specifications
  • Engineered to resist electrochemical degradation the leading cause of hose failure
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
  • Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)

NOTE: Gates recommends replacing hose clamps each time a new coolant hose is installed.

CAUTION: Do not use for fuel or oil transfer applications.

help
Not Fitted / Universal
Part # 12294
Gates
$10.44
Molded heater hose
Molded heater hose

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit todays smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.

  • Has all the quality features of Gates molded coolant hose and similar to OEM specifications
  • Engineered to resist electrochemical degradation the leading cause of hose failure
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
  • Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)

NOTE: Gates recommends replacing hose clamps each time a new coolant hose is installed.

CAUTION: Do not use for fuel or oil transfer applications.

help
Not Fitted / Universal
Parts Catalog
keyboard_arrow_upBack to Top